Surgical Tips for Successful Reverse Total Shoulder Arthroplasty by Ji Un Kim in Research & Investigations in Sports Medicine_Crimson publishers journals
Abstract
Reverse total shoulder arthroplasty (RTSA) has continuously evolved into an alternative to total shoulder arthroplasty for various shoulder disorders that cannot be managed with the traditional arthroscopic procedure. The indications have expanded and currently it is being used for multiple diagnoses. It has been developed continuously since original Grammont design, but still there is on debate over which model to choose and which is better. The purpose this mini-review is to describe several surgical tips for RTSA, as range of motion after reverse arthroplasty is not only affected by implant-related factors, but also surgeon’s technical factors such as retroversion of humeral component and soft tissue reconstruction like subscapularis repair. In a decision-making process for the successful treatment, it is important to consider various relevant factors and to have enough communication with patients to determine the most beneficial strategy for them.
Introduction
Reverse total shoulder arthroplasty (RTSA) has become a standard treatment for cuff tear arthropathy (CTA) in older individuals. The indications have expanded and currently it is being used for multiple diagnoses including fracture sequelae, revision arthroplasty, instability and tumors as well as CTA and massive rotator cuff tear. Surgical outcomes after RTSA are reported favorably, and RTSA reliably and effectively restores ranges of motion and provides shoulder pain relief. Range of motion (ROM) after RTSA can be influenced by 2 categories of factors: surgical factors that are considered modifiable (version of the humeral component, balancing of soft tissues, and so on) and prosthetic factors that are considered non-modifiable (size of the implant, neck-shaft angle of the humeral component, and so on). Neer suggested that implants with a design that mimicked the normal anatomy would provide the best function and durability. Therefore, many factors are related to restore the normal anatomy during performing RTSA, and the selection of the ideal configuration and placement of the components to optimize shoulder function outcomes remains an issue of debate. So, the purpose this mini review is to describe several surgical tips for successful RTSA.
Surgical Tips for Reverse Total Shoulder Arthroplasty
Since Paul Grammont introduced the biomechanical concept based on the medialization of the center of rotation and the downward translation of the humerus in 1985, RTSA has continuously evolved into an alternative to total shoulder arthroplasty for various shoulder diseases [1]. By medialization of the center of rotation, RTSA minimizes the torque of the glenoid components and recruits more fibers of deltoid muscle to act as the primary elevator of the shoulder, especially in patients with pseudoparalysis. However, this sort of medialized implants has higher incidents of complications, such as scapular notching, which is reported [2,3] as high as 60%, and limited ranges of motions. The recent designs of lateralized components have been used to reduce scapular notching and improve passive internal and external rotation of shoulder. Cuff et al. [4] reported that 96 patients with CTA had observed at least two years after lateralized RTSA and there were no mechanical failures or scapular notching. However, the torque and shear force at the baseplate-glenoid interface increases when using a lateralized glenoid component, it occurs to increase the failure rate of glenoid component [5].
The neck-shaft angle of humeral component can affect the outcomes of the RTSA. The 135° neck shaft angle is more anatomical, less scapular notching, and favorable for passive internal rotation and external rotation, even though the risk of instability [5]. However, original Grammont’s 155° neck shaft angle has good joint stability and is effective for lengthening deltoid muscle and improving ability of forward elevation. However, according to the biomechanical study [6], the 155° neck-shaft angle was more prone to scapular contact during adduction, but was more stable at the internal rotation, which was the least stable humeral rotation position.
Furthermore, although there are still debates on the role of
subscapularis repair in RTSA, several previous studies presented
similar clinical outcomes regardless of subscapularis repair in
lateralized RTSA. Werner et al. [7] reported that ASES scores were
significantly less improved in patients who underwent subscapularis
repair and glenosphere lateralization. But, Vourazeris et al. [8]
reported that primary RTSAs have similar clinical outcome scores,
range of motion, strength, and rates of complications, including
dislocations with or without subscapularis repair at 3 years of
follow-up. Oh et al. [9] reported that there was no significant
difference in range of motion and functional scores regardless of
subscapularis repair in the lateralized RTSA.
Proper retroversion of humeral component in RTSA is also
on debate. Implants with a design which mimicked anatomical
position would provide best function and durability and increasing
retroversion would lead to higher external rotation and lower
internal rotation [2]. Some study had argued that fixed humeral
retroversion between 0 and 30 degrees showed no significant
differences in RTSA [10]. However, these studies were biomechanical
cadaveric or finite element analysis studies, and few studies had
compared clinical results of native humeral retroversion to fixed
one. We must look at the recent clinical study presented better
clinical outcomes including range of motion in the individualized
retroversion group than fixed 20˚ group [9].
By the way, the current RTSA implants are designed for the United
States and western European patients. The anatomical differences
of the shoulders between Asian and Western populations should
be considered. Asians have a smaller glenoid diameter and a larger
lateral extension of acromial overhang than the Western population
[11]. These anatomical differences might result in different clinical
outcomes and complications of RTSA in the Asian population [12],
yet there have been no previous studies regarding factors that
might affect the results of RTSA in this patient group. Oh et al. [13]
investigated radiological factors affecting clinical outcomes, and
the deltoid lengthening (mean, 2.3cm) and inferior glenosphere
overhang (mean, 2.9mm) should be chosen for the better outcomes,
while the center of rotation should be individualized according to
patient characteristics in the Korean population.
Conclusion
RTSA is the first-line treatment for elderly patients with cuff tear arthropathy for reduction of pain and restoration of active elevation function, and also can be considered for massive rotator cuff tear with superior migration of the humeral head. For a decision-making process of the successful RTSA, it is important to consider various relevant factors and to have sufficient communication with patients to determine the most beneficial strategy for them.
References
- Baulot E, Sirveaux F, Boileau P (2011) Grammont's idea: the story of Paul Grammont's functional surgery concept and the development of the reverse principle. Clin Orthop Relat Res 469(9): 2425-2431.
- Sirveaux F, Favard L, Oudet D, Huquet D, Walch G, et al. (2004) Grammont inverted total shoulder arthroplasty in the treatment of glenohumeral osteoarthritis with massive rupture of the cuff. Results of a multicentre study of 80 shoulders. J Bone Joint Surg Br 86(3): 388-395.
- Werner CM, Steinmann PA, Gilbart M, Gerber C (2005) Treatment of painful pseudoparesis due to irreparable rotator cuff dysfunction with the Delta III reverse-ball-and-socket total shoulder prosthesis. J Bone Joint Surg Am 87(7): 1476-1486.
- Cuff D, Pupello D, Virani N, Levy J, Frankle M (2008) Reverse shoulder arthroplasty for the treatment of rotator cuff deficiency. J Bone Joint Surg Am 90(6): 1244-1251.
- Oh JH, Park MS, Rhee SM (2018) Treatment strategy for irreparable rotator cuff tears. Clin Orthop Surg 10(2): 119-134.
- Oh JH, Shin SJ, McGarry MH, Scott JH, Heckmann N, et al. (2014) Biomechanical effects of humeral neck-shaft angle and subscapularis integrity in reverse total shoulder arthroplasty. J Shoulder Elbow Surg 23(8): 1091-1098.
- Werner BC, Wong AC, Mahony GT, Craig EV, Dines DM, et al. (2018) Clinical outcomes after reverse shoulder arthroplasty with and without subscapularis repair: the importance of considering glenosphere lateralization. J Am Acad Orthop Surg 26(5): e114-e119.
- Vourazeris JD, Wright TW, Struk AM, King JJ, Farmer KW (2017) Primary reverse total shoulder arthroplasty outcomes in patients with subscapularis repair versus tenotomy. J Shoulder Elbow Surg 26(3): 450-457.
- Joo Han Oh, Nikhil Sharma, Sung Min Rhee, Joo Hyun Park (2019) Do individualized humeral retroversion and subscapularis repair affect the clinical outcomes of reverse total shoulder arthroplasty? J Shoulder Elbow Surg. Article in press.
- Friedman RJ, Flurin PH, Wright TW, Zuckerman JD, Roche CP (2017) Comparison of reverse total shoulder arthroplasty outcomes with and without subscapularis repair. J Shoulder Elbow Surg 26(4): 662-668.
- Cabezas AF, Krebes K, Hussey MM, Santoni BG, Kim HS, et al. (2016) Morphologic variability of the shoulder between the populations of North American and East Asian. Clin Orthop Surg 8(3): 280-287.
- Matsuki K, Sugaya H, Hoshika S, Ueda Y, Takahashi N, et al. (2017) Geometric analysis of the proximal humerus in elderly Japanese patients: implications for implant selection in reverse shoulder arthroplasty. Orthopedics 40(3): e485-e490.
- Sung-Min Rhee, Jeong Dong Lee, Yong Bok Park, Jae Chul Yoo, Joo Han Oh (2019) Prognostic Radiological Factors Affecting Clinical Outcomes of Reverse Shoulder Arthroplasty in the Korean Population. Clin Orthop Surg 11(1): 112-119.
No comments:
Post a Comment